Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Accuflow Systems Altafluor 350 THV Flex - has the flexibility of traditional PVC with chemical resistance to FEP - 350 THV .170" X 1/4"- 100 FT
Altafluor 350 THV FLEX (Tetrafluoroethylene-hexafluoropropylene. The preferred choice for UV light transmission. Good chemical resistance. Excellent bondability to other materials and has excellent ozone resistance, low permeation with superior weatherability.
Accuflow Systems Altafluor 350 THV Flex - has the flexibility of traditional PVC with chemical resistance to FEP - 350 THV 1/8" X 1/4"- 25 FT
Altafluor 350 THV FLEX (Tetrafluoroethylene-hexafluoropropylene. The preferred choice for UV light transmission. Good chemical resistance. Excellent bondability to other materials and has excellent ozone resistance, low permeation with superior weatherability.
Accuflow Systems Altafluor 200 FEP (Fluoronated Ethylene Propylene) - 200 FEP, 1/16" X 1/8"- 50 FT
Altafluor 200 FEP (Fluoronated Ethylene Propylene) is an economical choice for applications requiring chemical resistance in combination with broad temperature exposure. Altafluor 200 FEP offers excellent clarity which makes it ideal for sight glass/flow monitoring applications. Certified to NSF 51, NSF 61 and NSF 372. It has superior electrical insulation properties and is available in coiled hose and convoluted tubing constructions. Additionally, the outstanding UV transmission rate of FEP makes it a clear choice for UV transmission applications. Altafluor 200 tubing may be used with flare or conventional fittings.
Accuflow Systems C-Flex Tubing, Saint Gobain, 374, TPE, thermoplastic elastomer, weldable, 50ft
C-Flex Tubing, Saint Gobain, 374, TPE, thermoplastic elastomer, weldable, 50ft
Accuflow Systems C-Flex Tubing, Saint Gobain, Ultra, TPE, thermoplastic elastomer, weldable, 50ft
C-Flex Tubing, Saint Gobain, Ultra, TPE, thermoplastic elastomer, weldable, 50ft
Accuflow Systems C-Flex Tubing, Saint Gobain, 082, TPE, thermoplastic elastomer, weldable, 50ft
C-Flex Tubing, Saint Gobain, 082, TPE, thermoplastic elastomer, weldable, 50ft
Chemglass Life Sciences Tubing, Silicone, Peroxide-Cured Silcon, Size 25, 3/16" ID x 5/16" OD x 1/16" Wall Thickness x 50' Long
Peroxide-cured Silicone Tubing is designed for use in applications where flexibility, resiliency and durability are required.Its inner smooth surface reduces the risk of particulate entrapment and microscopic buildup during fluid transfer. Tubing is FDA food grade compliant, entirely non-toxic, non-hemolytic and non-pyrogenic.It also meets 3-A Sanitary Standards, FDA 21 CFR Part 177. 2600 Criteria and NSF 51 Standard.Withstands temperature extremes from -100F to 500F (350F maximum for NSF applications). May be low pressure steam sterilized in-line or autoclaved at up to 121C in a normal autoclaving cycle.May be sterilized repeatedly but if tubing becomes relaxed or gummy it should be replaced.Sold in standard lengths of 50ft.
Chemglass Life Sciences Tubing, Silicone, Peroxide-Cured Silcon, Size 15, 3/16" ID x 3/8" OD x 3/32" Wall Thickness x 50' Long
Peroxide-cured Silicone Tubing is designed for use in applications where flexibility, resiliency and durability are required.Its inner smooth surface reduces the risk of particulate entrapment and microscopic buildup during fluid transfer. Tubing is FDA food grade compliant, entirely non-toxic, non-hemolytic and non-pyrogenic.It also meets 3-A Sanitary Standards, FDA 21 CFR Part 177. 2600 Criteria and NSF 51 Standard.Withstands temperature extremes from -100F to 500F (350F maximum for NSF applications). May be low pressure steam sterilized in-line or autoclaved at up to 121C in a normal autoclaving cycle.May be sterilized repeatedly but if tubing becomes relaxed or gummy it should be replaced.Sold in standard lengths of 50ft.
Grainger InsulMultitapCon PVC 4 AWG 500 kcmil
The Polaris Insulated Multitap Connector is an electrical connector that allows multiple wires to be connected to a single point. It is rated for 600 volts and can accommodate wire sizes from 14-10 AWG. The connector has 4 ports and is made from UV resistant polypropylene. It can be used for a variety of indoor and outdoor applications including landscape lighting, deck lighting, sign lighting, and low voltage lighting. The insulated housing helps prevent shorts. This connector enables multiple lighting fixtures or devices to be wired to a single power source.
Grainger Hose Fitting Sleeve 5/16 In
The Aeroquip Compression Sleeve Brass is a brass compression sleeve fitting for use with AQP hose assemblies. It has a working pressure of 3000 psi and temperature range of -65 to +275°F. This compression sleeve is made of brass per SAE J514, has a thread size of 9/16-18 UNF, and is designed for use with 9/16" ID hose. The sleeve measures 1.28" in length. This brass compression sleeve fitting allows easy assembly and provides a heavy duty seal. It is an ideal choice for hydraulic applications using Aeroquip hose.
Chemglass Life Sciences Preassembled Closure and Septa, Black, GPI 13-425, 0.40" PTFE/Silicone/PTFE Septa
Preassembled Closure and Septa, Black, GPI 13-425, 0.40" PTFE/Silicone/PTFE Septa. Pre-assembled closure and septa minimize contamination from handling.